Guide: After nearly ten years of development, fiber laser cutting technology has gradually replaced punching and shearing technology, and has dominated the sheet metal processing industry. The laser cutting process has also been greatly improved, and the auxiliary gas Selection and reasonable applic
The idle distance of the early laser cutting machine is shown in the figure below. The cutting head needs to perform the third action for the second time: ascend (to a height that is safe enough), translate (reach above point B), and descend. Today, in the cutting process, there are six practical functions. With these practical functions, the processing efficiency and cutting performance of the laser cutting machine can be greatly improved.
At the end of November 2019 ,TA laser will move to New Factory ,Which is 3 times than old factory ,.Covering an area of 6,000 square meters, the production efficiency will be greatly improved, the quality control will be more strict, and will be prepared to open up a larger market. For the new 2020.
You can contact or visit us in our office from 7:00-17:00