Views: 82 Author: Site Editor Publish Time: 2020-03-10 Origin: Site
Some after-sales engineers report that during the delivery process, customers required 1000W fiber laser cutting machine to cut 6mm and 8mm stainless steel with oxygen. The cutting process is difficult to debug and the cutting effect is not good. In view of this situation, after cutting the sample in the company, the following cutting process experience is summarized. I hope that it can help the after-sales engineer to refer to it when dealing with such problems after out-sale.
Equipment: 1000W non-screen simple IPG laser RayTools laser head Focus position -1.5mm
NO. 1, cut 6mm stainless steel
Process parameters:
Cutting focus position: + 0.5mm Cutting copper nozzle Model: double layer 2.0mm
6mm stainless steel cutting section:
6mm stainless steel cutting back view:
6mm stainless steel cutting front view:
NO. 2, cut 8mm stainless steel
Process parameters:
Cutting focus position: + 2.5mm Cutting copper nozzle Model: double layer 2.0mm
8mm stainless steel cutting section:
8mm stainless steel cutting back view:
8mm stainless steel cutting front view:
